18
9.
Assembly of LED light strips
The LED strip is connected to the main PCB.
Once the mains unit supplies the main PCB with power, the LED strip will light up as
well.
Before you start, move the printing table all the way down.
Then pull the mains plug from the printer mains unit from the mains socket.
Also disconnect the green plug of the mains
unit from the main PCB.
1 x LED light strip (pre-sized)
There are two different options for attaching the converter PCB of the LED strip to the printer.
The first option is at the upper alu
-
minium profile on the left where the cable for the display is running as well.
The other method would be in the area of the main PCB.
If you want to use the self-printable housing for the main PCB, always choose the 1st
method.
Otherwise, it doesn't really matter.
If you want to attach the converter PCB to the left upper aluminium
profile, thread the line end of the LED strip from the inside through
the cable feedthrough to the PCB.
Push the cable through as far as
possible.
If you want to attach the converter PCB at the main PCB, push the
LED strip through the cable feedthrough from behind as far as pos-
sible.
