55
12. Assembly and mounting of the acrylic housing
The acrylic housing adds a dome and a door to the metal housing (see previous chapter). Therefore, the metal housing must be
assembled to complete the housing.
The housing is completely transparent. Upon delivery, all parts have a protective film attached to both sides. In order to be able to
include better photographs in the instructions, this protective film has been removed on one side only.
In general, we recommend removing the protective film only once mounting is complete. For the assembly, it is sufficient to remove
the protective film only in places where the parts are joined.
a) Assembly of the dome
Overview and arrangement of the parts of the dome
A1
- front plate with the cut-out for the display
A2
- top plate (lid)
A3
- rear plate with cut-out for the short toothed belt
A4
- 2x side plates with a cut-out for the filament hose.
The two side plates are completely identical.
A1
A4
A4
A2
A3
