57
1x rear plate
A3
with the 1. mounted side plate
A4
(not in the picture)
1x side plate
A4
2x cylinder head screws M3x12
2x screw nuts M3
Please note! The screws and nuts are depicted slightly
bigger.
Insert the two screw nuts into the slits inside the cut-outs.
Remove the protective film on both sides around the 2 boreholes of
the rear plate and around the two noses of the side plate.
Fasten the side plate with the two M3 cylinder head screws to the rear
plate as shown in the picture.
1x rear plate
A3
with both side plates attached
A4
(not shown in the picture)
1x top plate
A2
5x cylinder head screws M3x12
5x screw nuts M3
Please note! The screws and nuts are depicted slightly
bigger.
Insert the 4 screw nuts into the slits inside the upper cut-outs of the
two side plates and one screw nut into the cut-out of the rear plate.
Remove the protective film on both sides in the respective areas. Fa
-
sten the top plate to the two side plates using the 4 M3 cylinder head
screws, as shown in the pictures. Also fasten the rear plate to the top
plate using 1 M3 cylinder head screw.
