30
Position the printer so that the front
right
aluminium profile is acces
-
sible.
Release and remove the 4 M5 cylinder-head screws that attach the
profile.
Take the lower transverse profile from the printer and put it aside.
Remove das vertical aluminium profile from the printer.
Remove the foot from the disassembled aluminium profile and put it
aside.
The short vertical aluminium profile is no longer needed.
Insert the long aluminium profile into the printer and attach it at the top
with 2 of the 4 M5 cylinder-head screws.
Tighten the screws hand-tight.
Take the foot and screw it into the aluminium profile at the bottom.
Insert the lower transverse profile into the printer and attach it on both
sides with one cylinder-head screw each.
Tighten the screws hand-tight.
