Renesas SmartBond UM-B-041 Page 164 User Manual Download

Page: 164 / 170

UM-B-041

SmartBond Production Line Tool

User Manual

Revision 4.8

02-Nov-2022

CFR0012

164 of 170

No.

Status

Description

195.

DUT_UDLL_OTP_CHECK_SKIP_IF_WRITTEN_O
K

OTP check empty device already written with data.

196.

DUT_UDLL_OTP_CHECK_DIFFERENT_DATA_FA
ILED

OTP check empty device contains different data.

197.

DUT_UDLL_OTP_CHECK_EMPTY_FAILED

OTP check empty failed.

Memory programming - OTP binary write

198.

DUT_UDLL_OTP_BIN_WR_INIT

OTP binary write operation initialized.

199.

DUT_UDLL_OTP_BIN_WR_STARTED

OTP binary write operation started.

200.

DUT_UDLL_OTP_BIN_WR_OK

OTP binary write operation ended successfully.

201.

DUT_UDLL_OTP_BIN_WR_FAILED

OTP binary write operation failed.

Memory programming - OTP configuration script write

202.

DUT_UDLL_OTP_CS_WRITE_INIT

OTP CS field write operation initialized.

203.

DUT_UDLL_OTP_CS_WRITE_STARTED

OTP CS field write operation started.

204.

DUT_UDLL_OTP_CS_WRITE_NUM_OF_ENTRIES

OTP CS update the number of fields to be burned.

205.

DUT_UDLL_OTP_CS_WRITE_STATUS

OTP configuration script field write progress status update

206.

DUT_UDLL_OTP_CS_WRITE_RDBK_STARTED

OTP configuration script readback process started.

207.

DUT_UDLL_OTP_CS_WRITE_RDBK_STATUS

OTP configuration script readback progress status update

208.

DUT_UDLL_OTP_CS_WRITE_OK

OTP configuration script write ended successfully.

209.

DUT_UDLL_OTP_CS_WRITE_FAILED

OTP configuration script write failed.

Memory programming - Memory write operation

210.

DUT_UDLL_MEM_DATA_WR_INIT

Custom memory data burn operation started.

211.

DUT_UDLL_MEM_DATA_WR_INIT

Custom memory data burn operation started.

212.

DUT_UDLL_MEM_DATA_WR_STARTED

Custom memory data burn update interim status.

213.

DUT_UDLL_MEM_DATA_WR_OK

Custom memory data burn operation ended successfully.

214.

DUT_UDLL_MEM_DATA_WR_FAILED

Custom memory data burn operation failed.

Memory programming - Memory read operation

215.

DUT_UDLL_MEM_RD_INIT

Memory read operation initialized.

216.

DUT_UDLL_MEM_RD_STARTED

Memory read operation started.

217.

DUT_UDLL_MEM_RD_OK

Memory read operation ended successfully.

218.

DUT_UDLL_MEM_RD_FAILED

Memory read operation failed.

Production tests

– Scan test

219.

DUT_PDLL_BLE_SCAN_INIT

Scan test initialize.

220.

DUT_PDLL_BLE_SCAN_START

Scan test started.

221.

DUT_PDLL_BLE_SCAN_NOT_YET_FOUND

Scan test, DUT not yet found.

222.

DUT_PDLL_BLE_SCAN_FOUND

Scan test, DUT found.

223.

DUT_PDLL_BLE_SCAN_RSSI_FAILED

Scan test, DUT found but RSSI failed.

Summary of Contents for SmartBond UM-B-041











































































































































































Search results

Summary of Contents for SmartBond UM-B-041

Reviews:

Related manuals for SmartBond UM-B-041

Brands by name

Popular brands

Renesas SmartBond UM-B-041, User Manual

Search results

Summary of Contents for SmartBond UM-B-041

Reviews:

Related manuals for SmartBond UM-B-041

Brands by name

Popular brands