Renesas SmartBond UM-B-041 Page 48 User Manual Download

Page: 48 / 170

UM-B-041

SmartBond Production Line Tool

User Manual

Revision 4.8

02-Nov-2022

CFR0012

48 of 170

Applying a source code patch for each one of the binaries is described below.

6.12.1

Golden Unit Firmware

The Golden Unit is a DA14580 device. A modified version of the

prod_test_580.bin

firmware is

used.

This patch contains all the changes needed to re-create the following firmware.

●

prod_test_GU.bin

To re-create the exact source code of the

prod_test_GU.bin

firmware:

1. Use a clean copy of the

DA1458x_SDK_5.0.4

SDK from the customer portal.

2. Copy the contents of the

‘…\

fw_files\GU\DA1458x_SDK_5.0.4\DA1458x_SDK\5.0.4\

’ folder to

the default SDK.

3. The Keil v5 project file of the

prod_test_GU.bin

is the

‘

prod_test.uvprojx

’ under the folder

‘\

5.0.4\projects\target_apps\prod_test\prod_test\Keil_5\

’.

6.12.2

DA1470x Firmware

This patch contains all the changes needed to re-create the following firmware:

●

uartboot_da1470x.bin

●

st_fw_da1470x.bin

To re-create the exact source code of the above firmware:

1. Use a clean copy of the

SDK_10.2.4.44

from the customer portal.

2. Copy the contents

from ‘

fw_files\DUT\DA1470x\SDK_10.2.4.44

’ folder to the

SDK_10.2.4.44

SDK.

3. The SmartSnippets

Studio project file of the

st_fw_da1470x.bin

is the

‘

st_fw

’

project under

‘

SDK_10.2.4.44\projects\dk_apps\reference_designs\st_fw

’ folder. To create each binary,

select from the drop-down

menu the “

Release RAM

” option for each chip.

4. The SmartSnippets

Studio project file of the

uartboot_da1470x.bin

is the

‘

uartboot

’ project

under the folder

‘

SDK_10.2.4.44\sdk\bsp\system\loaders\uartboot

’. To create the binary,

select from the drop-down

menu the “

Release

” option.

5. The Smart Snippets Studio project file of the

pxp_reporter_da1470x.img

is the

‘

pxp_reporter

’

under the folder

‘

SDK_10.2.4.44\projects\dk_apps\demos\pxp_reporter

’

To create each

binary, select from the drop-down menu the

‘

QSPI_Release

’ option for each chip.

Each binary will be created under the project folder in a folder having the same name as the selected
option.

Summary of Contents for SmartBond UM-B-041











































































































































































Search results

Summary of Contents for SmartBond UM-B-041

Reviews:

Related manuals for SmartBond UM-B-041

Brands by name

Popular brands

Renesas SmartBond UM-B-041, User Manual

Search results

Summary of Contents for SmartBond UM-B-041

Reviews:

Related manuals for SmartBond UM-B-041

Brands by name

Popular brands