Renesas RZ/G1E Page 35 User Manual Download | Manualshive

Page: 35 / 141

background image

RZ/G1E

4. Pin Multiplexing

R01UH0544EJ0100 Rev.1.00

4-1

Sep 30,2016

4. Pin Multiplexing

4.1

List of Multiplexed Pin Functions

Table 4.1 lists the multiplexed pin functions of the RZ/G1E.

The default pin function of each pin after power-on reset is "Function 1" respectively, unless otherwise mentioned.

For details on pin function control, refer to section 3.3, Mode Pin Settings and section 5, Pin Function Controller (PFC).

[Legend]

•

Leftmost column of table
No.: Serial number
Pin No.: BGA package ball grid number
Mode Pin (only for corresponding pin): Mode pin is assigned

•

Middle column of table
Function n (n=1, 2, 3, ...)/GPIO: Module or GPIO
Module: Module abbreviation except for GPIO
Pin Name: Module or GPIO pin name
I/O: Input or output,

i.e., I: Input, I(S): Schmitt input, IO: Input and output, IO (OD): Input and open drain output, O: Output, P:
Power supply pin. (I)/(H)/(L)/(X)/(Z) with I, O or IO: Default pin state (only for default pin, except for clock or
analog output), H: High level output, L: Low level output, X: Undefined value output, Z: High impedance

"Reserved" in module column is assigned optional function and "-" in module column is internal function or undefined,
they must not be specified. This indication is different from that of in section 5, Pin Function Controller (PFC).

•

Rightmost column of table
During POR: Pin state during power-on reset (PRESET# pin input is low-level)
V(power)/|IOH|: Pin voltage (power domain) and output drive current (nominal value respectively)
Pull-up: Internal pull-up control function is available or not from a power-on reset

"On": Pull-up control function is available and default state is pulled-up.

(No.110, ACK pin is available for internal pull-down function.)

"Off": Pull-up control function is available and default state is not pulled-up.

"-": Pull-up control function is not available.

For details of pull-up control function, refer to PUPR0 through PUPR6 registers in section 5, Pin Function
Controller (PFC).

Notes: 1. Pin name that has an identifier for example "XXXX_B", "XXXX_C" etc. are mirror pins of the XXXX pin.

Only one pin out of the XXXX pin or its mirror pins can be used. When using mirror pin, specify the suite of
pin that has the same identifier for the selected module. It is prohibited to use a suite of pin as mixed two or
more identifiers for a selected module.

2. Do not use any pins that of unused modules.

3. Unused pins must be handled as described in section 4.3, Handling of Unused Pins.

4. The terminal state after the reset cancellation has been described as a premise not using the BKPRST

(BKRST#=H(fixed)).

«
...
33
34
35
36
37
...
»

Summary of Contents for RZ/G1E














































































































































Reviews:

No comments

Related manuals for RZ/G1E

System x3630 M4

Brand: IBM Pages: 7

Brand: Patton electronics Pages: 8

Brand: Cervoz Pages: 22

Quadro M6000 Sync

Brand: Nvidia Pages: 8

SiliconDrive SSD-P16G(I)-3100

Brand: Silicon Systems Pages: 108

Brand: Idis Pages: 22

Brand: S&T Pages: 28

Brand: IBM Pages: 72

Brand: Ubiquiti Pages: 13

VIGI NVR1004H-4P

Brand: TP-Link Pages: 2

Brand: Alcatel-Lucent Pages: 60

Brand: Vivotek Pages: 46

Lexicon MPX 200

Brand: Harman Pages: 77

Brand: Nexus Pages: 9

Brand: ZyXEL Communications Pages: 263

Brand: ICP DAS USA Pages: 8

Brand: b&t Pages: 34

Brand: ADTRAN Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands