Renesas H8 Series User Manual Download Page 62

Page: 62 / 272

5.1.2

Selecting an MCU Not Included in the List

Selecting [Custom] in [Device] of the [Configuration Properties] dialog box adds the [Custom Device] page to
the dialog box.

Figure 5.2 [Configuration Properties] Dialog Box ([Custom Device] Page)

Use this page to specify functions for an MCU not included in the list of MCUs. The items are adopted by the
device last selected.

[Custom Device] page

[ROM]

Specify the internal ROM area size.

[RAM]

Specify the internal RAM area size.

[Pin]

Specify the product package.

[Modules]

Check this box to validate on-chip peripherals.

Note: The items that can be set in this dialog box vary according to the emulator in use. Some emulators may

not support the [Custom Device] function. For details, refer to section 8, Software Specifications
Specific to This Product, or the online help.

Summary of Contents for H8 Series

















































































































































































































































































Search results

Summary of Contents for H8 Series

Reviews:

Related manuals for H8 Series

Brands by name

Popular brands

Renesas H8 Series, User Manual

Search results

Summary of Contents for H8 Series

Reviews:

Related manuals for H8 Series

Brands by name

Popular brands