Renesas H8 Series User Manual Download Page 128

Page: 128 / 272

106

5.8.14

Analyzing Statistical Information

Choose [Statistic] from the popup menu to open the [Statistic] dialog box and analyze statistical information
under the specified conditions.

Figure 5.56 [Statistic] Dialog Box

[Statistic Analysis]:

Setting required for analysis of statistical information.

[Default]:

Sets a single input value or character string.

[Range]:

Sets the input value or character string as a range.

[Item]:

Sets the item for analysis.

[Start]:

Sets the input value or character string. To set a range, the start value must be
specified here.

[End]:

Specify the end value if a range has been set (only available when [Range] has been
selected).

[Set]:

Adds a new condition to the current one.

[New]:

Creates a new condition.

[Result]:

Obtains the result of statistical information analysis.

[Clear]:

Clears all conditions and results of statistical information analysis.

[Close]:

Closes this dialog box. All the results displayed in the [Result] list will be cleared.

Summary of Contents for H8 Series

















































































































































































































































































Search results

Summary of Contents for H8 Series

Reviews:

Related manuals for H8 Series

Brands by name

Popular brands

Renesas H8 Series, User Manual

Search results

Summary of Contents for H8 Series

Reviews:

Related manuals for H8 Series

Brands by name

Popular brands