Renesas H8 Series User Manual Download Page 107

Page: 107 / 272

(1) [General] page

Set the range for searching.

Figure 5.37 [Trace Find] Dialog Box ([General] Page)

[Trace search range]:

Sets the range for searching.

[Not designation]:

Searches for information that does not match the conditions set in other
pages when this box is checked.

[Upward search]:

Searches upwards when this box is checked.

[Start PTR]:

Enters a PTR value to start a search.

[End PTR]:

Enters a PTR value to end a search.

Note: Along with setting the range for searching, PTR values to start and end searching can be set in the [Start

PTR] and [End PTR] options, respectively.

Summary of Contents for H8 Series

















































































































































































































































































Search results

Summary of Contents for H8 Series

Reviews:

Related manuals for H8 Series

Brands by name

Popular brands

Renesas H8 Series, User Manual

Search results

Summary of Contents for H8 Series

Reviews:

Related manuals for H8 Series

Brands by name

Popular brands