Renesas H8 Series User Manual Download Page 10

Page: 10 / 272

SAFETY PAGE

READ FIRST

•

READ this user's manual before using this emulator product.

• KEEP the user's manual handy for future reference.

Do not attempt to use the emulator product until you fully understand its mechanism.

DEFINITION OF SIGNAL WORDS

This is the safety alert symbol. It is used to alert you to potential personal

injury hazards. Obey all safety messages that follow this symbol to avoid

possible injury or death.

DANGER

indicates an imminently hazardous situation which, if not

avoided, will result in death or serious injury.

WARNING

indicates a potentially hazardous situation which, if not

avoided, could result in death or serious injury.

CAUTION

indicates a potentially hazardous situation which, if not

avoided, may result in minor or moderate injury.

CAUTION

used without the safety alert symbol indicates a

potentially hazardous situation which, if not avoided, may result

in property damage.

NOTE

emphasizes essential information.

Summary of Contents for H8 Series

















































































































































































































































































Search results

Summary of Contents for H8 Series

Reviews:

Related manuals for H8 Series

Brands by name

Popular brands

Renesas H8 Series, User Manual

Search results

Summary of Contents for H8 Series

Reviews:

Related manuals for H8 Series

Brands by name

Popular brands