Renault ALASKAN 2020, Vehicle User Manual

Page: 285 / 334

ENGINE COMPARTMENT
CAUTION
Never use a fuse of a higher or lower amperage
rating than that specified on the fuse box cover.
This could damage the electrical system or cause
a fire.
Never attempt to use other material (wire, alu-
minium foil. etc.) in place of a fuse. This could
damage the electrical system or cause a fire.
The location and the amperage rating of fuses are
shown on the underside of the fuse box lid.
The number of fuses may vary depending on the
features equipped to the vehicle.
If any electrical equipment does not operate, check
for an open fuse.
1. Be sure the ignition switch is in the OFF or LOCK
position.
2. Be sure the headlight switch is in the OFF posi-
tion.
3. Open the engine bonnet.
4. Remove the fuse/fusible link cover by pushing
the tab.
5. Locate the fuse which needs to be replaced.
6. Remove the fuse using the fuse puller located in
the passenger compartment fuse box.
7. If the fuse is open
j
A , replace it with a new fuse
j B .
If the new fuse also opens, after installing, have
the electrical system checked, and if necessary
repaired, by an approved dealer or qualified work-
shop.
Fusible links
If any electrical equipment does not operate and
the fuses are in good condition, check the fusible
links. If any of these fusible links are melted, replace
only with genuine replacement parts.
NDI1692
NDI1694
SDI1753Z
NDI1693
FUSES
Maintenance and do-it-yourself
277