Renault ALASKAN 2020, Vehicle User Manual

Page: 108 / 334

•
Do not place the integrated key fob for an ex-
tended period in an area where temperatures
exceed 60°C (140°F).
If a integrated key fob is lost or stolen, RENAULT rec-
ommends erasing the ID code of that integrated
key fob from the vehicle. This may prevent the un-
authorised use of the integrated key fob to unlock
the vehicle. For information regarding the erasing
procedure, contact an approved dealer or qualified
workshop.
For information regarding the replacement of a bat-
tery, see “Remote controller battery replacement” in
the “8. Maintenance and do-it-yourself” section.
USING REMOTE KEYLESS ENTRY
SYSTEM
WARNING
For Super Lock System equipped models, failure
to follow the precautions below may lead to haz-
ardous situations. Make sure the Super Lock Sys-
tem activation is always safely conducted.
•
When the vehicle is occupied, never lock the
doors with the integrated key fob. Doing so will
trap the occupants, since the Super Lock Sys-
tem prevents the doors from being opened
from the inside of the vehicle.
•
Only operate the integrated key fob lock but-
ton when there is a clear view of the vehicle.
This is to prevent anybody from being trapped
inside the vehicle through the Super Lock Sys-
tem activation.
➀
LOCK button
➁
UNLOCK button
➂
Battery indicator light
Locking doors
1. Remove the ignition key.
2. Close all doors.
3. Push the LOCK button
➀
on the integrated
key fob.
4. All doors and the AdBlue® filler lid will be locked.
5. Operate door handles to confirm that the doors
have been securely locked.
CAUTION
After locking the doors using the integrated key
fob, be sure that the doors have been securely
locked by operating the door handles.
Unlocking doors
1. Push the UNLOCK button
➁
on the inte-
grated key fob.
2. All doors and the AdBlue® filler lid will be un-
locked.
All doors will be locked automatically unless one of
the following operations is performed within 30 sec-
onds after pushing the UNLOCK
button
➁
.
•
Opening any doors.
•
Inserting the key into the ignition switch.
Battery indicator light
The battery indicator light
➂
illuminates when you
push any button. If the light does not illuminate, the
battery is weak or needs replacement. For informa-
tion regarding replacement of a battery, see “Re-
mote
controller battery replacement” in the
“8. Maintenance and do-it-yourself” section.
Hazard indicator operation
When you lock or unlock the doors, the hazard indi-
cator will flash as a confirmation.
•
LOCK: The hazard indicator flashes once.
•
UNLOCK: The hazard indicator flashes twice.
JVP0222XZ
100
Pre-driving checks and adjustments