Renault ALASKAN 2020, Vehicle User Manual

Page: 250 / 334

➀
For front wheel
➁
For rear wheel
1. Place the jack directly under the jack-up points
➀➁
as illustrated.
The jack should be placed on firm level ground.
2. Loosen each wheel nut, anticlockwise, one or two
turns with the wheel nut wrench.
Do not remove the wheel nuts until the tyre is
off the ground.
3. Install the assembled jack rod into the jack as
shown.
4. Carefully raise the vehicle until the clearance be-
tween the tyre and ground is achieved.
5. To lift the vehicle, securely hold the jack lever and
rod with both hands and turn the jack lever.
Removing tyre:
1. Remove the wheel nuts.
2. Remove the damaged tyre.
CAUTION
The tyre is heavy. Be sure that your feet are clear
from the tyre and use gloves as necessary to
avoid injury.
NCE501
For coil suspension models
NCE130Z
242
In case of emergency