Renault ALASKAN 2020, Vehicle User Manual

Page: 184 / 334

•
[Del. device]
A registered Bluetooth device can be deleted.
•
[Bluetooth]
If this setting is turned off, the connection be-
tween the Bluetooth devices and the in-vehicle
Bluetooth module will be cancelled.
[Scan devices]:
1) Press the button. Select [Scan device]
The audio unit searches bluetooth devices and
shows all visible devices.
Make sure your Bluetooth device is visible at this
time.
2) Select the device to be paired.
Use the <MENU> dial and press to select.
3) The pairing procedure may depend on the de-
vice to be connected:
a. Device without PIN code:
The Bluetooth connection will be automati-
cally connected without any further input.
b. Device with PIN code:
Two different ways of pairing are possible de-
pending on the device:
– Type A:
The message [To pair] [Enter Pin] 0000 will
be displayed.
Confirm the PIN code on the device.
The Bluetooth connection will be made.
– Type B:
The message [Pairing request] [Confirm
password] together with a 6 digit code will
be displayed. The unique and identical code
should be displayed on the device. If the code
is identical confirm on the device.
The Bluetooth connection will be made.
[Pair device]:
•
Turn the audio unit Bluetooth® on. See [Blue-
tooth] description.
•
Use the audio unit to pair:
Press the
button. Select the [Pair Device] key.
The pairing procedure depends on the
Bluetooth® device to be connected:
1) Device without PIN code:
The Bluetooth® connection will be automati-
cally connected without any further input.
2) Device with PIN code:
Two different ways of pairing are possible de-
pending on the device, for the correct proce-
dure details, see “[Scan devices]” earlier in this
section.
•
Use the Bluetooth® audio/mobile phone device
to pair:
1) Follow the instructions in the owner's
manual for the Bluetooth® enabled device to
search for the audio unit.
If the search mode finds the audio unit it will
be shown on the device display.
2) Select the audio unit shown as [My Car].
3) Follow the instructions in the owner's
manual for the Bluetooth® enabled device to
establish a connection with the audio unit.
4) Enter the PIN code shown on the relevant de-
vice with the device's own keypad, and press
the confirmation key on the device itself.
Refer to the relevant Bluetooth® device own-
er’s manual for further details.
[Sel. device]:
The paired device list shows which Bluetooth® au-
dio or mobile phone devices have been paired or
registered with the Bluetooth® audio system. If the
list contains devices then select the appropriate de-
vice to connect to the Bluetooth® audio system.
The following symbols (where fitted) indicate the
capability of the registered device:
•
: Mobile phone integration
•
: Audio streaming (A2DP – Advanced Audio
Distribution Profile)
[Del. device]:
A registered device can be removed from the Blue-
tooth audio system. Select a registered device then
press
<ENTER> to confirm to deletion.
[Bluetooth]:
If Bluetooth® has been switched off a notification
message [ON/OFF] appears when you select [Blue-
tooth] from the phone menu (press
). To switch
the Bluetooth® signal on, press <ENTER> and a fol-
low up screen will appear. Then select [ON] and
press
<ENTER> to display the Bluetooth® settings
menu screen.
176
Display screen, heater and air conditioner, and audio system