Renault ALASKAN 2020, Vehicle User Manual

Page: 209 / 334

PRECAUTIONS ON PUSH-BUTTON
IGNITION SWITCH OPERATION
WARNING
Do not operate the push-button ignition switch
while driving the vehicle except in an emergency.
(The engine will stop when the ignition switch is
pushed 3 consecutive times or the ignition switch
is pushed and held for more than 2 seconds.) The
steering wheel may lock and could cause the
driver to lose control of the vehicle. This could re-
sult in serious vehicle damage or personal injury.
REMOTE CONTROL KEY SYSTEM
The Remote Control Key system can operate the
ignition switch without taking the key out from your
pocket or bag. The operating environment and/or
conditions may affect the Remote Control Key sys-
tem operation.
Some indicators and warnings for operation are dis-
played in the vehicle information display and/or in
the meter. (See “Warning lights, indicator lights and
audible reminders” in the “2. Instruments and
controls” section and “Vehicle information display”
in the “2. Instruments and controls” section.)
CAUTION
•
Be sure to carry the Remote Control Key with
you when operating the vehicle.
•
Never leave the Remote Control Key inside the
vehicle when you leave the vehicle.
•
If the vehicle battery is discharged, the igni-
tion switch cannot be switched from the
“LOCK” position, and if the steering lock is en-
gaged, the steering wheel cannot be moved.
Charge the battery as soon as possible. (See
“Remote Control Key battery replacement” in
the
“8. Maintenance and do-it-yourself”
section.)
Operating range
The Remote Control Key can only be used for start-
ing the engine when the Remote Control Key is
within
the specified operating range
➀
as
illustrated.
When the Remote Control Key battery is almost dis-
charged or strong radio waves are present near the
operating
location, the Remote Control Key
system’s operating range becomes narrower and
may not function properly.
If the Remote Control Key is within the operating
range, it is possible for anyone, even someone who
does not carry the Remote Control Key, to push the
ignition switch to start the engine.
•
The cargo bed area is not included in the oper-
ating range of the engine start function.
•
If the Remote Control Key is placed on the in-
strument panel, inside the glove box, door
pocket or the corner of the interior compart-
ment, the Remote Control Key may not function.
•
If the Remote Control Key is placed near the door
or window outside the vehicle, the Remote Con-
trol Key may function.
AUTOMATIC TRANSMISSION (AT)
The ignition lock is designed so that the ignition
switch cannot be switched to the “LOCK” position
until the shift lever is moved to the P (Park) position.
When pushing the ignition switch to the “OFF” posi-
tion, make sure the shift lever is in the P (Park) posi-
tion.
When the ignition switch cannot be switched to the
“LOCK” position:
1. [Shift to Park] warning appears on the vehicle in-
formation display and a chime sounds.
2. Move the shift lever to the P (Park) position.
3. If the ignition switch is in the “ACC” position,
[PUSH] warning appears on the vehicle informa-
tion display.
4. Push the ignition switch. The ignition switch is
switched to the “OFF” position.
5. Open the door. The ignition switch turns to the
“LOCK” position.
JVS0442XZ
PUSH-BUTTON IGNITION SWITCH (models with Remote Control Key
system)
Starting and driving
201