Renault ALASKAN 2020, Vehicle User Manual

Page: 192 / 334

[Pair device]:
•
Turn the audio unit Bluetooth on. See [Bluetooth]
description.
•
Use the audio unit to pair:
Press the
button. Select the [Pair device]
key. The Audio unit will wait for a connection re-
quest from the mobile device.
The
pairing procedure depends on the
Bluetooth device:
1) Device without PIN code:
The Bluetooth connection will be automati-
cally connected without any further input.
2) Device with PIN code:
Two different ways of pairing are possible de-
pending on the device, see under [Scan de-
vice] for a description.
•
Use the Bluetooth® audio/mobile phone device
to pair:
1) Switch ON the Bluetooth® devices search
mode on the mobile device.
If the search mode finds the audio unit it will
be shown on the device display.
2) Select the audio unit shown as [My Car].
3) Enter the number code shown on the rel-
evant device with the device's own keypad,
and press the confirmation key on the device
itself.
Refer to the relevant Bluetooth® device own-
er’s manual for further details.
[Sel. device]:
The paired device list shows which Bluetooth® au-
dio or mobile phone devices have been paired or
registered with the Bluetooth® audio system. If the
list contains devices then select the appropriate de-
vice to connect to the Bluetooth® audio system.
The following symbols (where fitted) indicate the
capability of the registered device:
•
: Mobile phone integration
•
: Audio streaming (A2DP – Advanced Audio
Distribution Profile)
[Del. device]:
A registered device can be removed from the Blue-
tooth audio system. Select a registered device then
press
<ENTER> to confirm the deletion.
[Bluetooth]:
If Bluetooth® has been switched off a notification
message [ON/OFF] appears when you select [Blue-
tooth] from the phone menu (press
). To switch
the Bluetooth® signal on, press <ENTER> and a fol-
low up screen will appear. Then select [ON] and
press
<ENTER> to display the Bluetooth® settings
menu screen.
HANDS-FREE TELEPHONE
CONTROL
The hands-free mode can be operated using the
telephone
button on the audio system, or the
and (where fitted) on the steering wheel.
Receiving a call
When receiving an incoming call, the display will
show the caller's phone number (or a notification
message that the caller's phone number cannot be
shown) and three operation icons.
1. Answering and during a call:
Answer the call by pressing <ENTER> (the is
highlighted).
By pressing <ENTER> , you can select the following
options:
•
Ending the call by selecting and press
<ENTER> .
•
Put the call on hold by selecting and press
<ENTER> .
•
[ ]
Use this item (the transfer handset command)
to transfer the call from the audio system to your
mobile phone.
To transfer the call back to hands-free via the
audio system select [
].
184
Display screen, heater and air conditioner, and audio system