Renault ALASKAN 2020, Vehicle User Manual

Page: 191 / 334

Up to 5 different Bluetooth devices can be con-
nected. However, only one device can be used at a
time. If 5 different Bluetooth registered devices are
registered, a new device can only replace one of the
5 existing paired devices. Use [Del. device] key to de-
lete one of the existing paired devices. For details,
see “[Del. device]” later in this section.
When successfully paired a notification message will
be displayed, then the audio system display will re-
turn to the current audio source display. During con-
nection the following status icons will be displayed
(top left of the display): Signal strength (
), Bat-
tery status* ( ) and Bluetooth “ON” ( ).
*: If the low battery message comes on, the Blue-
tooth® device must be recharged soon.
The pairing procedure and operation may vary ac-
cording to device type and compatibility. See the
Bluetooth® owner’s manual for further details.
NOTE
•
For device details, see your audio/mobile
phone Owner's Manual.
•
For assistance with the Bluetooth® audio/mo-
bile phone integration, please visit your local
approved dealer.
•
A maximum of 5 Bluetooth devices can be
paired with the system.
To set up the Bluetooth system with a device the
following items are available:
•
[Scan devices]
Shows all available visible Bluetooth devices and
initializes Bluetooth connection from the audio
unit.
•
[Pair device]
Initializes Bluetooth connection from the mobile
device.
•
[Sel. device]
Paired Bluetooth devices are listed and can be
selected for connection.
•
[Del. device]
A registered Bluetooth device can be deleted.
•
[Bluetooth]
If this setting is turned off, the connection be-
tween the Bluetooth devices and the in-vehicle
Bluetooth module will be cancelled.
[Scan devices]:
1) Press the button. Select [Scan device]
The audio unit searches bluetooth devices and
shows all visible devices.
Pressing the button cancels the search.
2) Select the device to be paired.
Use the <MENU> dial and press to select.
3) The pairing procedure depends on the device to
be connected:
1) Device without PIN code:
The Bluetooth connection will be automati-
cally connected without any further input.
2) Device with PIN code:
Two different ways of pairing are possible de-
pending on the device:
– Type A:
The message [To pair] [Enter Pin] 0000
and a count down timer will be displayed.
Confirm the PIN code on the device.
The Bluetooth connection will be made.
If the count down timer reaches 0 the at-
tempt to pair the devices will be cancelled.
– Type B:
The message [Pairing request] [Confirm
password] together with a 6 digit code
will be displayed. The unique and identi-
cal code should be displayed on the de-
vice. If the code is identical confirm on the
device.
The Bluetooth connection will be made.
Display screen, heater and air conditioner, and audio system
183