Renault ALASKAN 2020, Vehicle User Manual

Page: 23 / 334

Forward and backward:
1. Pull the adjusting lever
➀
up.
2. Slide the seat to the desired position.
3. Release the adjusting lever to lock the seat in
position.
Reclining:
CAUTION
When moving the seats forward or backward, or
returning a rear-reclined seatback to its upright
position, make sure you hold onto the seatback
while operating. If the seatback is not held, the
seat or seatback will move suddenly and could
cause injury.
1. Pull the adjusting lever
➁
up.
2. Tilt the seatback to the desired position.
3. Release the adjusting lever to lock the seatback
in position.
The reclining feature allows the adjustment of the
seatback for occupants of different sizes to help ob-
tain the proper seat belt fit. (See “Fastening seat
belts” later in this section.)
The seatback may be reclined to allow occupants
to rest when the vehicle is parked.
Seat lifter (where fitted):
Pull up or push down the adjusting lever
➂
to ad-
just the seat height until the desired position is
achieved.
Power seat adjustment (where fitted)
WARNING
Never leave children or adults who would nor-
mally require the support of others alone in the
vehicle. Pets should not be left alone either. They
could unknowingly activate switches or controls,
or move the vehicle, and inadvertently become
involved
in a serious accident and injure
themselves.
Operating tips:
•
The power seat motor has an auto-reset over-
load protection circuit. If the motor stops during
the seat adjustment, wait 30 seconds, then re-
activate the switch.
•
To avoid discharge of the battery, do not oper-
ate the power seats for a long period of time
when the engine is not running.
JVR0392XZ
Safety — seats, seat belts and supplemental restraint system
15