Renault ALASKAN 2020, Vehicle User Manual

Page: 152 / 334

3. Push the temperature control buttons ( and
) to set the desired temperature.
•
When the <DUAL> indicator light is not illumi-
nated, pushing the <DUAL> button (the
<DUAL> indicator light will illuminate) allows
the user to independently change the driver
and passenger side temperatures with the
corresponding temperature control buttons
(
and ).
•
To cancel the separate temperature setting,
push the <DUAL> button (the <DUAL> indica-
tor light will turn off) and the driver's side
temperature setting will be applied to both
the driver and passenger sides.
4. Push either the outside air circulation but-
ton or the air recirculation button (the but-
ton with an indicator light illuminated) for ap-
proximately 2 seconds to switch to the auto-
matic air intake control mode (the indicator light
will blink twice).
A visible mist may be seen coming from the vents in
hot, humid conditions as the air is cooled rapidly.
This does not indicate a malfunction.
Heating (A/C off):
1. Push the <AUTO> button (the <AUTO> indicator
light will illuminate).
2. If the A/C indicator light is illuminated, push the
A/C button (the A/C indicator light will turn off).
3. Push the temperature control buttons ( and
) to set the desired temperature.
•
When the <DUAL> indicator light is not illumi-
nated, pushing the <DUAL> button (the
<DUAL> indicator light will illuminate) allows
the user to independently change the driver
and passenger side temperatures with the
corresponding temperature control buttons
(
and ).
•
To cancel the separate temperature setting,
push the <DUAL> button (the <DUAL> indica-
tor light will turn off) and the driver's side
temperature setting will be applied to both
the driver and passenger sides.
•
Do not set the temperature lower than the out-
side air temperature. Doing so may cause the
temperature to not be controlled properly.
•
If the windows fog up, use dehumidified heating
instead of the
A/C off heating.
Dehumidified defrosting/defogging:
1. Push the front defogger button (the
indicator light will illuminate).
2. Push the temperature control buttons ( and
) to set the desired temperature.
•
To quickly remove frost from the outside surface
of the windscreen, set the temperature control
and the fan speed to the maximum levels.
•
After the windscreen is cleared, push the
<AUTO> button to return to the <AUTO> mode.
•
When the front defogger button is pushed,
the air conditioner will automatically turn on,
sensing the outside air temperature to defog the
windscreen. For the best defogging perfor-
mance, do not select the air recirculation mode.
•
Do not set the temperature too low when the
front defogger mode is on (the
indicator
light is illuminated), because doing so may fog
up the windscreen.
Manual operation
The manual mode can be used to control the heater
and air conditioner to your desired settings.
Fan speed control:
Push the fan speed control button ( + side or −
side) to manually control the fan speed.
Air flow control:
Push the <MODE> button to select the desired
mode:
m
—
Air flows from the centre and side
vents.
m
—
Air flows from the centre and side
vents and foot outlets.
m
—
Air flows mainly from the foot outlets
m
—
Air flows from the front defogger
outlets and foot outlets.
144
Display screen, heater and air conditioner, and audio system