Calendar programming
With this menu it is possible to set the time period
for "AUTOMATIC OPERATION" and the holiday
periods of a year with the corresponding setpoints.
The
key next to
"CALENDAR",
in the "TIMER"
menu accesses the section of the corresponding
programming. If the
key next to
"CALENDAR
PROGRAM"
is then pressed, this calls up the cor-
responding submenu where the calendar can be
configured and up to three different operating times
can be set within the year; these are displayed with
the times P1, P2 and P3. The respective
key
next to each of the three time periods, accesses
the page for changing the corresponding time
period enabling a start and end to be assigned.
The corresponding time can be enabled or disa-
bled with the "ENABLE/DISABLE" switch. Confirm
the settings with "OK" and exit the section without
saving with
.
10:15
Urlaubszeitprogrammierung
Kalenderprogrammierung
Kalender
10:15
P1
P2
P3
ANFANG/ENDE
01 - 04 / 01 - 09
01 - 01 / 01 - 01
01 - 01 / 01 - 01
OK
Kalender - P1
10:15
Aktivierung
Ende
01 - 09
OK
Anfang
01 - 04
Mon 01 Jan
Mon 01 Jan
Mon 01 Jan
Kalenderprogrammierung
Kalenderprogrammierung
Kalender - P1
Calendar
Calendar programming
Calendar programming
Holiday time programming
Calendar - P1
Calendar - P1
Start
End
Activation
START/END
Calendar programming
Fig. 17: Set calendar
REMKO room temperature controller
20
