ON/OFF
The
key next to the submenu "ON/OFF"
selects the regulation with simple on/off operation
(standard setting), both in "manual mode" and in
"automatic mode". In this type of control, the units
connected to the room thermostat are switched on
and off in accordance with the temperature set-
point (
DREAM
), in accordance with the temperature
measured by the reference sensor (
TREF
) and in
accordance with the differential Xd (Neutral Zone)
set in the "TEMPERATURE SETPOINT" menu.
In ON/OFF mode, the modulation of the units
(hot air generators) connected to the room tem-
perature controller takes place via the inlet
sensor built into each unit.
10:15
MENU
A
F
C
B
E
D
10:15
PID
Kaskade
ON/OFF
Einstellungen
OK
A
ON/OFF
10:15
PID
Kaskade
ON/OFF
Einstellungen
OK
Mon 01 Jan
Mon 01 Jan
Mon 01 Jan
Settings
PID
Cascade
ON/OFF
ON/OFF
Settings
PID
Cascade
Fig. 26: Setting ON/OFF
29
