To change the switching times of the selected day,
press the
key to call up the sub-program for
programming. For each day of the week, up to five
different, independent switching times (from F1 to
F5) can be defined. These are programmed by set-
ting the start time, the end time and the setpoint for
each period. In the hours without an activated
switching time, the room temperature controller
automatically goes to the N=OFF operating mode.
After setting the switching times for the desired
day, confirm the selection with "OK" until the main
graphic display appears again. On this page, you
can go to the programming of another day by
pressing the
key or return to the "HOME" home
page by pressing the
key. The switching times
set for one day of the week can be copied to
another. To do this, go down in the "TIMER ACTI-
VATION" menu to the
"COPY"
item and call up the
submenu with the corresponding
key. Within
this submenu, you can select the day of the week
to be copied in the
"Copy"
section and the day to
which the settings are to be copied in the
"Paste"
section. You can also simply copy the settings from
a single day of the week to all days of the week by
selecting "All" in the
"Paste"
section. With "OK"
the task is confirmed and you return to the start
page.
10:15
Cm
0
3
6
9
12
15
18
21
24
Ec
An
10:15
Cm
0
3
6
9
12
15
18
21
24
Ec
An
OK
10:15
F1
F2
F3
M
ANFANG/ENDE
An 00:00 / 06:30
Cm 08:00 / 12:00
Cm 13:30 / 17:00
OK
Montag
Montag
Mon 01 Jan
Mon 01 Jan
Mon 01 Jan
Ändern Montag
Monday
Change Monday
START/END
Monday
Fig. 19: Set switching times
REMKO room temperature controller
22
