2
Unit description
2.1 Description
The room temperature controllers ATR-Smart-Web
and ATR-Smart-Basic can be identified by the
identification plate on the front of the unit and the
data plate on the outside of the packaging. When
contacting the repair service, please always state
the model of the room temperature controller and
the serial number. The difference between the
"ATR-Smart-Web" model and the "ATR-Smart-
Basic" model is explained later in this manual.
A
B
A: ATR-Smart-Web
B: ATR-Smart-Basic
Technical properties
The remote controls from the ATR-Smart-Web or
ATR-Smart-Basic series are independent control-
lers that can be used to control many different sys-
tems. They are suitable for controlling a system
with one zone in which one to a maximum of 32
units can be installed simultaneously. They can be
used as a set-up device during initial installation or
connected as optional accessories to the units
equipped with GPC Smart processors, namely:
n
New series of GPC condensing units
The circuit CANNOT be used with units
equipped with processors older than those
specified above.
Main features of the ATR-Smart series controllers:
n
Easy connection to the unit via two electrical
wires.
n
Complete management of the operating
parameters of the processors of the connected
units.
n
Possibility of installing up to 3 room sensors in
addition to those mounted in the unit.
n
TFT colour monitor, 4.3 inch touch screen (res-
olution 480x272 pixels)
n
Multilingual user program (Italian, English,
Spanish, French, German, Dutch, Czech,
Polish, Romanian).
n
Complete management of the remote control
and all functions via the web (only with ATR-
Smart-Web).
Operating temperature: -15°C to +60°C
7
