REMEHA Avanta Plus 24s, Installation And Service Manual

Page: 45 / 153

45
1
2
Gas
230 V
2x
1. Open the boiler
LT.AL.W7H.000.058
• Isolate the 230 V supply at the switched spur and remove
the fuse
• Isolate the gas supply at the boiler gas valve
• Remove the front panel (release the two screws at the bot-
tom of the front panel, pull the bottom of the panel forward
and lift off the two pins on the top of the main casing).
2. Maintenance of the ignition/ionisation electrode
LT.AL.W7H.000.059
• Disconnect the earth wire from the electrode mounting
plate.
• Release the two screws on the electrode and remove the
assembly.
• Inspect, clean re-gap or replace the electrode, see par
3.1.3 .