REMEHA Avanta Plus 24s, Installation And Service Manual

Page: 150 / 153

5
1 to 5 Power and switch connections (cable and plug X2 supplied as std)
6 LCD Display
Sliding three position Switches
7 Three position sliding switch to set operating mode
I
Permanently ON (Current time of day must be set before this is active)
AUTO Switches ON and OFF in accordance with programmed switch times
O
Permanently OFF
8 Three position sliding switch to set Current time/day and switching times
RUN Switch program and clock run
P1 Input switch times for Channel 1(Heating)
P2 Input switch times for Channel 2 (Domestic Hot Water)
Setting Buttons
9 P Button for activating in sequence the 16 available switch points
When time switch points 1, 3, 5, 7, 9, 11, 13, 15, (ON times) are
selected, the bulb symbol - will appear in the right of the
display.
If time switch points 2, 4, 6, 8, 10, 12, 14, 16 (OFF times)
are selected, there will be no bulb symbol.
10 DAY Button to scroll between days (current day and switching
days). Indicated with
∆
below the day or days set
When programming, individual days and the following block day
programs are possible:
M-F (Monday to Friday) M-S (Monday to Saturday)
S-Su (Saturday to Sunday) M-Su (Monday to Sunday)
11 H Button to set time in hours
(for current time and switching times)
12 MIN Button to set time in minutes
(for current time and switching times)
11+12 H+MIN Simultaneously pressing both buttons for 2-3 seconds enables the
actual time and day to be set or edited
13 -X-> Skip-Function
Pressing the Skip button reverses the current function mode
ie: If the timer is ON it will be switched OFF and vice-versa.
14 R Reset button will return the timer to factory default times and delete
current time, day and all changed switching times.
Display will show flashing 0:00 - Timer will need to be re-programmed
Note: When setting times
Pressing the buttons momentarily - changes the display one digit at a time
Pressing the buttons for longer than 1 second - changes the display more rapidly
If you overshoot the time or day required continue to press the button until it scrolls around