REMEHA Avanta Plus 24s, Installation And Service Manual

Page: 121 / 153

4
Remeha Avanta Plus
1 SAFETY
This User Guide uses specific terms and pictograms to draw
particular attention to instructions. Broag does this to enhance
the user’s safety, to prevent problems and ensure the technical
reliability of the boiler.
1.1 General safety
The following pictograms are used in this Installation and User
manual to specifically draw certain points to your attention:
Tip 
Useful tip or practical advice.
Indication 
Important instruction in carrying out
a particular operation.
Warning 
Possible danger of personal injury
or material damage to the regulator,
building or environment.
Danger 
Serious personal injury can occur
because of risk of electric shocks.

Can you smell gas? What to do:
•
Do not smoke and do not create any flame or sparks.
•
Do not use any electric switches.
•
Turn off the main gas stop cock.
•
Open windows and doors.
•
Warn those present and leave the building together.
•
Call your gas suppliers / installer once you are outside the
building, TRANSCO tel. 0800 111 999.
 Can you smell smoke or flue gases? What to do:
•
Switch off the boiler.
•
Open windows and doors.
•
Warn those present and leave the building together.
•
Call your installer once you are outside the building.

Installation location for the boiler!
•
Do not store or use any flammable materials, aggressive
substance and/or aerosols near the boiler.
•
The installation area must be frost-free.
•
The switched spur unit for the boiler must always be
accessible.
 Water and pipe temperatures!
•
The factory setting for the tap water temperature is 55°C;
this temperature can be set to 65°C.
•
The maximum water temperature in the Avanta Plus can
reach 90°C. This means that pipes and/or radiators can
reach this temperature.
•
If the boiler is running, the flue duct can reach a high
temperature.