REMEHA Avanta Plus 24s, Installation And Service Manual

Page: 48 / 153

48
Remeha Avanta Plus
230 V
1
3
2
If a cleaning operation becomes necessary, please proceed as
follows:
• Turn off the mains cold water supply and drain off the resid-
ual DHW;
• Release two socket head screws and remove plate heat
exchanger;
• Clean plate heat exchanger with scale solvent (e.g. citric
acid, pH 3); a special cleaning tool (optional accessory) can
be used;
•
Thoroughly cleaning afterwards with clean water;
•
Remove non return valve with filter from on the right hand
side of the hydro block and also clean with the scale sol-
vent; afterwards thoroughly cleaning with clean water.
LT. AL.W7H.000.231 + LT.AL.W7H..000.232