Regin Regio Maxi, Manual

Page: 94 / 99

94
Part V
Signals
Alarms.AlaAcknow X,3 266 255 External alarms are acknowledged by
setting this signal to the alarm number
that you want to acknowledge
Alarms.AlaBlock X,3 267 255 External alarms are blocked by setting
this signal to the alarm number that you
want to block
Alarms.AlaUnBlock X,3 268 255 External alarms are unblocked by setting
this signal to the alarm number that you
want to unblock
QSystem.Sek
X,3
269 - Real-time clock: Second 0-59
QSystem.Minute
X,3
270 - Real-time clock: Minute 0-59
QSystem.Hour X,3 271 - Real-time clock: Hour 0-23
QSystem.WDay X,3 272 - Real-time clock: Weekday 1-7,
1=Monday
QSystem.Week X,3 273 - Real-time clock: Week number 1-53
QSystem.Date X,3 274 - Real-time clock: Day of the month 1-31
QSystem.Month X,3 275 - Real-time clock: Month 1-12
QSystem.Year X,3 276 - Real-time clock: Year 0-99
LonWorks network variables
Name Type Description
Configuration
nciSndHrtBt SNVT_time_sec Pulse (0=disabled)
nciRcvHrtBt SNVT_time_sec Max. time before a requested value is discarded
nciSetPnts SNVT_temp_setpt Setpoints
nciHvacType SNVT_hvac_type Model
nciBypassTime SNVT_time_min Time in bypass mode
nciCO2PresenceHyst SNVT_ppm Hysteresis for inactivation of occupancy
nciCO2PresLimit SNVT_ppm CO
2
concentration at which occupancy is activated
nciCO2LimitLow SNVT_ppm CO
2
concentration at which the dampers start to open
nciCO2LimitHigh SNVT_ppm
CO
2
concentration at which the dampers are
completely open
nciPpmHyst SNVT_ppm
Hysteresis before ppm values are transmitted via the
bus
nciTempHyst SNVT_temp_p
Hysteresis before temperature values are transmitted
via the bus
nciPercentHyst SNVT_lev_percent
Hysteresis before percentages are transmitted via the
bus
Inputs (nvi)
nviSpaceTemp SNVT_temp_p Room temperature
nviSetPtOffset SNVT_temp_p Setpoint offset
nviOccManCmd SNVT_occupancy Setting of running mode, Occ/UnOcc/Byp/Standby