Redmond RMC-PM180 User Manual Download Page 61

Page: 61 / 100

Pressure Multicooker RMC-PM180

GBR

Prior to first use or in order to remove the odor, steam half a lemon for 20 minutes using “Суп-Овощи” program, steam release

valve closed.

Caution! Do not use a sponge with hard or abrasive surface; solvent and abrasive cleaning methods (gas, acetone, etc.) are not

allowed.

Clean the bowl and inner aluminum lid after each use (the bowl is dishwasher safe). By the end of cleaning wipe the bowl dry.
Condensation may accumulate in the special cavity around the bowl. Remove condensate with the help of soft cloth or tissue

after each use.

Cleaning the Steam Valve and the Sealing Ring

Steam release valve is located on the lid of the device and consists of inner and outer parts.

Pull up the steam valve regulator located on the outer side of the lid, in order to remove. Follow “Cleaning and Gen

eral Maintenance Guidelines” to clean the regulator.

Open and remove the lid. There is a steam valve protective cover located on its inner side.

3. Unscrew the protective cover, clean and rinse the cover and the steam release outlet with warm running water, follow-

ing “Cleaning and General Maintenance Guidelines”. Screw the protective cover back on, attach the regulator and

slightly push it down to get fixed into place.

4. Carefully remove the sealing ring, located on the inner side of the lid. Rinse the ring under warm running water and

place it back evenly, avoiding distortion.

VI. BEFORE CALLING FOR SERVICE

Error Code

Error Description

Error Handling

Е1

Error of the pressure sensor

Unplug the device and let it cool down. Close the lid tightly. If this does not

eliminate the error address an authorized service center.

Е3

System error, possible system board or heating

element malfunction.

Address an authorized service center.

Е5

The device is overheating.

Unplug the device and let it cool down.

VII. PRODUCT WARRANTY

We warrant this product to be free from defects for a period of 25 months from the date of purchase. If the appliance fails

to operate properly within the warranty period and is found to be defective in material or workmanship, we will repair or

replace it free of charge. This warranty comes into force only in case an original warranty service coupon with a serial article

number and an accurate impress of the company of the seller proves the purchase date. This limited warranty does not

cover damage caused by the failure to use this product for its normal purpose or in accordance with the instructions on the

proper use and maintenance of the product or any kind of repair works. Do not try to disassemble the device and keep all

package contents. This warranty does not cover normal wear of the device and its parts (filters, bulbs, ceramic, Teflon, and

other kinds of non-stick coatings, rubber parts etc.).
Service life and the applicable product warranty period start on the date of purchase or the date of manufacture (if the

purchase date cannot be established).

You can determine manufacture date by serial number, located on the identification label on the housing of the device. The

serial number consists of 13 digits. 6th and 7th digits of the serial number identify the month, 8th digit the year of manu-

facture.
Service life of the product, established by the manufacturer is 5 years from the date of purchase, provided that the unit is used

and maintained in accordance with the user manual and applicable technical standards.

The packaging, user manual, and the device itself may not be treated as household waste. Instead, it shall be taken to the ap-

plicable collection point for the recycling of electrical and electronic equipment.