re:3D Gigabot, Installation Manual

Page: 92 / 115

gigabot
®
: unassembled
232
Use a small flathead screwdriver to separate the cable carrier
links apart into shorter segments.
Be mindful of the orientation of the cable carriers. They will
turn in only one direction.
Continue using the wiring clips, removing them as you install
the cable carriers.
The 8 links on the tapped corner plate are reverse-oriented.
In other words, they attach to the Y cable carriers, but are
oriented such that they turn in the opposite direction relative to
the rest of them. Two tabs on the interfacing link of the reverse-
oriented links have been removed to allow for this. If your set
has not had this done, carefully remove them with a small knife,
or grind them away using a rotary tool.
Tips & Tricks
#1
#2
#3
#4