re:3D Gigabot, Installation Manual

Page: 17 / 115

h37
h38
h39
This was alluded to in
H33-H35, but for the
center wheels on the
right-side bed side plate,
the convention to tighten
is to turn them towards
the vertical center of the
plate (as opposed to the
horizontal center).
Repeat steps H33-H37 for
the opposite side of the
bed frame.
After performing the
tensioning on all of the
wheels, move the bed
frame up and down along
the Z-uprights and perform
the same check as in H34
at different locations and
adjust as necessary.
gigabot
®
: unassembled
157