27
RECORDING
Timer Recording Information
The clock must be set correctly.
Insert a tape with the safety tab in
place and enough tape to record
the program.
“PROGRAMS OVERLAP” appears if
you have entered two programs
whose times overlap.
The TIMER indicator appears in the
display when you turn off the VCR
and a timer recording has been set.
“TIMER” flashes if there is no tape in
the VCR.
When recording from a cable box or
satellite receiver, turn on that unit
and tune it to the channel you want
to record before the recording is to
begin. The VCR channel should be set
to the cable box output channel
(usually channel 3 or 4).
TIMER RECORDINGS
1 Create a New Program
2 Review Existing Progs.
0 Exit
3. Select 1 to Create a New Program.
How often should this
program record?
1 One time
2 Daily (every day)
3 Weekdays (M-F)
4 Weekly (once per week)
0 Cancel
4. Select how often you want the program to record.
Program 1 (One time)
Channel --
Start Time --:--
End Time --:--
Start Date --/--/--
Tape Speed SLP
Press MENU to cancel
5. Enter the data for the program with the number
buttons.
The data includes the channel number (press INPUT to
select the line input), start time, and end time
(including AM or PM). The start date is automatically
entered based on the VCR clock. The date and/or speed
can be changed when flashing.
6. Review the information to make sure it is correct, and
then press MENU to save.
Program 1 (One Time)
Channel 104 Cable
Start Time 08:00 PM
End Time 09:30 PM
Start Date 11/16/00 THU
Tape Speed SLP
Press CLEAR to erase
Press MENU to save
Program 1 has been saved
Remember to insert a
recordable tape and
turn the VCR off before
the program start time.
Remember to leave your
cable box on and tuned
to the desired channel
7. Press MENU to save the program.