30
RECORDING
Caution:
The unauthorized recording of
satellite broadcasts, television
programs, or other copyrighted
materials may infringe the rights
of others.
CABLE BOX
OR ANTENNA
TO TV
TO TV
3 CH. 4
ANT. IN
RF OUT
VIDEO
AUDIO
OUT
IN
L
R
IN
(FROM ANT.)
OUT
(TO TV)
VIDEO
AUDIO
RF
LINE
OUT
LINE
IN1
R
L
CH
3 4
IN
OUT
PLAYBACK VCR
RECORDING VCR
OR
OR
Two VCR Connection
Note that the two VCRs used in the diagram may not look
exactly like the VCRs you are connecting. The important thing
is to match the proper cable connections. Use the OUT jacks
of the playback VCR to connect to IN jacks of the recording
VCR
.
Connect R output jacks to R INPUT jacks, L output to L
input, and VIDEO out jacks connect to VIDEO in jacks.
Copying and Editing Tapes
Using Two VCRs
Use one VCR as the
playback VCR
and the other as the
recording VCR
.
1. Connect the VCRs using the diagram provided.
2. Turn on both VCRs and TV.
3. Tune the TV to the VCR viewing channel (either 3, 4, or
TV’s video input). (See “How to Find Your TV’s Video
Input Channel” in the
References
section of this
manual for detailed information).
4. If you are using coaxial cables for the connection, tune
recording VCR
to channel 3 or 4—the one selected on
the
playback VCR.
If you are using audio/video
cables, select the line input on the
recording VCR.
5. Insert the tape you want to copy into
playback VCR.
Insert a blank tape with its safety tab in place into
recording VCR.
6. Using visual search, locate the segment you want to
copy on the
playback VCR.
Pause the tape at this
location.
7. Press RECORD on the
recording VCR
, then PAUSE.
8. Press PAUSE on both VCRs (releasing pause mode) to
begin copying.
9. Press PAUSE on both VCRs to stop copying.
10. Repeat steps 6–9 to copy or edit additional segments.