17
Setting Up the VCR
AUTO REPEAT
Set the length of time
you want the tape to
play in a repeating loop
Loop from 0:00 to -:--
(h:mm)
Press CLEAR to turn off
Press MENU to exit
•
The CLEAR key will erase all three numbers entered
and move the cursor back to the first position (hours).
•
The “Press CLEAR to turn off” message will appear only
after the first number has been entered into the end
time.
•
Auto Repeat is set back to -:-- by resetting the dialog
box, by cassette ejecting or insertion, by powering off
the VCR, by power interruption, or by recording start.
When a duration time has been set:
•
The VCR will automatically switch to rewind if the
counter meets or goes past the Auto Repeat set
duration.
•
The VCR will automatically switch to playback during
rewind if the counter equals or is less than 0:00.
•
The Auto Repeat may be adjusted by setting the
counter to 00:00. This can be done by pressing the
CLEAR button while the tape counter is on screen or on
the front panel display.
• The counter will not reset while rewinding in an Auto
Repeat loop.