44
Appendix: reference
Front Panel
AUDIO (R and L mono) and VIDEO IN Jacks
Receives
signals from another component, like a VCR or camcorder,
when it is connected to these jacks. Use INPUT on the
remote to select “L2” to record from these jacks.
CHANNEL•TRACKING Up or Down
Selects next higher or
lower channel in the VCR’s channel memory. Adjusts
tracking when a tape is playing. Press both together to re-
center tracking.
FWD
Forwards the tape when the VCR is stopped.
Searches the picture forward during playback. Starts slow
motion during play-pause and increases slow-motion
speed.
PLAY•PAUSE
Plays a tape. Pauses action for viewing
during playback. Pauses recording to prevent recording of
unwanted scenes.
POWER
Turns the VCR on or off.
RECORD
Starts VCR recording. Used for express recording.
Remote Sensor
Receives signals from the remote control.
Aim the remote at this sensor.
REV
Rewinds the tape when the VCR is stopped. Searches
the picture in reverse during playback. Starts slow motion
during play-pause and decreases slow-motion speed.
SPEED
Selects a recording speed (either SP or SLP)
STOP•EJECT
Stops the normal functions such as record,
playback, rewind, fast-forward, or pause. Ejects the tape
when the VCR is stopped.
TV•VCR
Switches the picture signal so that it either comes
from the VCR or the cable/antenna system.
Remote Sensor
REV
RECORD
STOP•EJECT
VIDEO
POWER
AUDIO
R
L MONO
TV / VCR
TAPE SPEED
PLAY
P A U S E
FWD
CHANNEL
TRACKING
CHANNEL
TRACKING