78
Playback
Transfer the Pictures in Memory to a PC
Pictures stored in the built-in memory can be transferred and saved to a PC having a
Windows® 95 or Windows® 98 operating system using the cable and software
provided. Consult the included software manual for installation and use of the
software.
Connect the Camcorder to a PC
1. Turn off the power to the camcorder
and PC.
We suggest you use the adapter/
charger to power the camcorder due to
the time involved transferring pictures
to or from a PC.
2. Connect the
DIGITAL
connector on
the back of the camcorder to the
COM
Port (
RS-232C
) on the PC using the
supplied cable.
3. Place the
POWER
switch in
VCR
and
the
DSC/VIDEO
switch in
DSC.
Make sure a picture stored in memory
appears in the viewfinder or on the
LCD monitor.
4. Install and open the software program
provided
using the supplied CD and
software instruction manual
.
PC Connection
Cable
Connect to COM
Port (RS-232C) on
the PC
Connect to
DIGITAL
Connector of the camcorder.
*Microsoft® and Windows® are registered trademarks of Microsoft Corporation.
5. During transfer of pictures from the
camcorder to the PC,
PC MODE
is
displayed on a blue screen in the
viewfinder or on the LCD monitor.
6. When you are finished, close the
software and then turn off the
camcorder.
Notes:
The images will be transferred in the mode
they were recorded (Fine or Standard).
Transferring the pictures to the PC does not
delete them from the camcorder’s memory.
If you are transferring pictures from the PC to
the camcorder, make sure the number of
remaining pictures available is more than the
number of pictures being transferred.
Summary of Contents for CC6393
Page 105: ...Connection and Software Guide ...
Page 131: ......