RCA CC6393 User Manual Download

Page: 16 / 132

Power Your Camcorder

Caution

When a battery is attached to the adapter/charger, do not turn them

upside down. The battery may fall off and be damaged or cause injury.

Charge the Battery

If the DC cable is attached to the

DC OUT

jack on the adapter/charger, remove it.

1. Align reference mark on battery with

mark on adapter/charger.

2. Hold the battery flush against the

adapter/charger and slide it in the
direction of the arrow.

3. Plug adapter/charger into nearest AC

outlet (100-240V, 50/60Hz).

4. If the battery is properly connected,

the

CHG

indicator flashes.

Note:

If you try to charge a battery that

has not been charged for a long period of
time, it may take a few minutes for the

CHG

indicator to flash.

5. After the battery is charged, the

CHG

indicator stops flashing and lights.

6. Remove the charged battery by

sliding it off the adapter/charger.

7. Attach the charged battery to the

camcorder.

Use the

REFRESH

Button

The battery provides increased
operation time if you “refresh” it after
five chargings. The refresh feature
“refreshes” the battery by completely
discharging it.

1. Attach battery to adapter/charger.

2. Press

REFRESH

. The

REFRESH

indicator lights and the battery
begins discharging.

3. When discharging is completed, the

REFRESH

indicator turns off, and

the

CHG

indicator flashes. The

battery now charges.

Reference
Marks

To AC Wall
Outlet 100-
240 Volts,
50/60 Hz.

CHG

(Charge)
Indicator

Adapter/Charger

REFRESH

Button

REFRESH

Indicator

Use the Battery to Power Your Camcorder

(

Continued

)

Hold Battery Flush
and Slide

Summary of Contents for CC6393





































































































































Search results

Summary of Contents for CC6393

Reviews:

Related manuals for CC6393

Brands by name

Popular brands

RCA CC6393, User Manual

Search results

Summary of Contents for CC6393

Reviews:

Related manuals for CC6393

Brands by name

Popular brands