Standard 30 MF
110-700
Operator and Service Manual
Edition: 8
2-23
4361.DOC010302 AUG18.DOCX
The default value for the course bus baud rate is 9600 bit/s.
4. Press the
Set
key to confirm the selected value.
‐
The font color of the chosen baud rate setting changes to orange.
‐
From now on, the signals on the course bus will be transmitted at the newly chosen
baud rate.
5. Record the set baud rate for the course bus in the tables in chapter 2.5.3.
For NMEA Adjustments
1. In the
SERIAL OUTPUT DATA SETUP
dialog in
the
PROTOCOL
line select
NMEA
with the arrow keys.
2.
Press the
Set
key on the Operator Unit.
‐
The dialog for making the NMEA telegram transmission setting appears.
‐
The NMEA
menu entry is displayed
in orange
and highlighted in
yellow.
Figure 2-14
Dialog SERIAL OUTPUT DATA SETUP – NMEA
3. Press
Page
key to select desired port.
4. Select the desired minimal baud rate for transmission of the activated NMEA
telegrams with the arrow keys.
‐
The selected value will be highlighted yellow.