Standard 30 MF
110-700
Operator and Service Manual
Edition: 8
3-3
4361.DOC010302 AUG18.DOCX
The timers are reset with each speed or latitude update. It is
irrelevant whether the values were entered manually or fed into the
system by external sensors.
After 3 hours without any speed or latitude update a message to
enter the current speed value or latitude value is issued, respectively.
Figure 3-5
Information in the Lower Section, Screen 4
Information in the lower section of screen 4:
RoT as a numerical value
RoT as a graphical bar
3.3
Manual Input of Latitude and Speed
If the Standard 30 MF does not receive any speed and latitude
values from a connected system, these values have to be entered
manually into the Operator Unit at regular intervals to ensure
accurate heading calculation.
It is recommended to use correct data from log and GNSS as top
priority.
