Gilat Satellite Networks
|
Confidential and Proprietary Information
|
71
Configuring the ACU with the ACU LCD Display
The ACU menus are used to program antenna parameters.
To view the ACU menu options:
Press the
Enter
button to bring up the following menus:
o
Diagnostics LCD Parameters, see page 72.
o
Setup LCD Parameters, see page 73.
o
Install LCD Parameters, see page 74.
o
IP Config LCD Parameters, see page 74.
o
Manual Mode LCD Parameters, on page 77.
o
Location LCD Parameter, on page 77.
o
Coordinates LCD Parameter, on page 77.
Viewing or Changing Parameters
The
Diagnostics
parameter settings are available for viewing only. The
Setup
,
Install
, and
IP Config
parameter settings are available for viewing and changing.
Important Note:
Changing these parameters can cause the system
to malfunction. Changes should only be made by a qualified
technician.
To view LCD Diagnostics parameters:
1. On the LCD screen, scroll to
Diagnostics
and press the
Enter
button to access
the menu.
2. Use the
Up
/
Down
arrows to scroll through the parameters.
To view LCD Setup, Install, or IP Config parameters:
1. On the LCD screen, scroll to
Setup
and press the
Enter
button to access the
menu.
2. The LCD displays
Enter Code
.
Press the
Up
arrow 4 times to enter the password.
3. The LCD displays 4 asterisks for the password.
Press the
Enter
button to accept.
4. Use the
Up
/
Down
arrows to scroll through the parameters.
To change Setup, Install, or IP Config parameters:
1. Scroll to the required parameter.
2. Press the
Enter
button and the parameter will begin flashing.
3. Press
Enter
to accept the change, or
Esc
to back out of the current parameter or
selected menu.
