Gilat Satellite Networks
|
Confidential and Proprietary Information
|
47
Rear View – ACU Cable Connections
Verify that all connections are correct and finger tight before powering on.
Turn on the power using the switch located on the back of the ACU.
Only use the inverter on the back of the ACU for providing power for
the satellite modem. DO NOT plug any other electronic equipment
or appliances into this outlet. Doing so may overload and damage
the ACU.
Figure 52: ACU rear connections
Table 12: ACU rear panel connections
No.
Connection/Button
Description
1
Cable from antenna
Connects to the antenna’s control Port.
2
Cable to satellite TV receiver
3
Ethernet for controller access
4
Power supply cable
ACU power input – 12-24 VDC.
5
On/Off Switch
Turns the unit on or off.
For the required cables, see Connecting the System, on page 33.
