Gilat Satellite Networks
|
Confidential and Proprietary Information
|
23
3. Mount the metal legs on the roof.
a. Place the legs on the roof, orientated as shown in the drawing.
b. Precisely adjust the position of each leg. You must see the cross mark you
made on the roof through the central hole of the base plate of the leg.
c.
Press the leg firmly to the roof and drill 8 (eight) holes with diameter Ø2.8
mm through the 8 holes Ø5 of the base plate.
d. Trace the contour of the plates on the bus roof with a permanent marker.
e. Move the legs aside.
f.
Using No.100 sandpaper, grind the four rectangles marked on the roof to
provide better adhesion for gluing of the legs.
Figure 24: Sanded rectangles on the bus roof
g. Apply the supplied glue (CAD1000000) to the rectangles on the roof and on
the bottom face of the leg plate.
h. Press the legs on the predefined positions.
i.
Fasten the legs to the bus roof with the supplied screws. The following
screw types can be used, according to the roof material:
Fiberglass roof - MFS0000341 Screw 4.0X20 Pan Head Self Tapping PT
BN
Metal roof - MFS2000163 Screw 4.2X19 Tapping PH DIN7981 A2
j.
Wipe off the excessive glue around the legs.
