62
|
Gilat Satellite Networks
|
Confidential and Proprietary Information
Dynamic Network Settings
This page manages the embedded DHCP Client/Server.
When Client is selected, the
Show Dynamic Parameters
link is available.
When Server is selected, the
Show Clients
link is available.
Dynamic settings must be used if a router is connected to the system. Then, when the
DHCP is in
Client
mode, the router will distribute the IP addresses dynamically.
Alternatively, if the laptop is set to DHCP
Client
mode and it should not be changed,
the ACU can be set to DHCP
Server
mode so that the ACU will give the IP to the
laptop.
Figure 63: Dynamic Network Settings
Table 21: ACU web interface - Dynamic Network Settings
Parameter
Value Range
Description
DHCP
On or Off
Enables or disables the embedded
DHCP feature.
DHCP mode
Client/Server
Sets the DHCP mode.
Fields displayed when DHCP mode is Server
Address Range
Range of 10 addresses
inside the subnet
The range of network addresses
assigned to the clients.
Lease Time
60 - 86400
The period of address allocation in
seconds.
