Gilat Satellite Networks
|
Confidential and Proprietary Information
|
77
Manual Mode LCD Parameters
Table 36: ACU LCD – Manual Mode parameters
LCD Indication
Description
1
RSSI Freq. -
Used to set the RSSI frequency in MHz.
2
Band
- Used to set the High or Low band of operation.
3
Polarization
- Used to set the Vertical (or RHCP) or
Horizontal (or LHCP) polarization of operation.
4
Acquisition
- Used to start acquisition of a satellite with
selected orbital position in degrees.
5
Tuner
- Shows the ACU tuner status - Locked or Unlocked.
6
BER
- Shows the BER reading of the ACU tuner.
7
C/N
- Shows the C/N reading of the ACU tuner.
8
Replies with:
Read NID
- Used to read the selected transponder NID.
The transponder frequency is equal to the RSSI frequency.
Location LCD Parameters
Table 37: ACU LCD – Location parameters
LCD Indication
Description
1
For places without GPS service, where the built-in GPS
cannot report coordinates. Location then displays the
Province and City from a database that maintains
Province.City.Coordinates. Feature is available on request.
Coordinates LCD Parameters
Table 38: ACU LCD – Coordinates parameters
LCD Indication
Description
1
When the Location feature applies and a specific location
is not in the Location database, local coordinates can be
set manually. This can also be done anywhere that the GPS
cannot lock for an extended time. Once the GPS locks, the
ACU updates those coordinates with GPS-generated ones.
