Gilat Satellite Networks
|
Confidential and Proprietary Information
|
73
LCD Indication
Description
18
RSSI Frequency -
Displays the antenna RSSI frequency.
19
RSSI -
Displays the antenna RSSI level.
20
RSSI BW -
Displays the antenna RSSI filter bandwidth.
21
RSSI Threshold -
Displays the antenna RSSI threshold.
Setup LCD Parameters
Table 31: ACU LCD - Setup parameters
LCD Indication
Description
1
Receiver
- Select the type of satellite TV receiver being
used. This is not used for two-way data communications.
2
Modem
- Select the type of satellite modem being used for
data operations.
3
Sound
- Used to turn the sound on/off.
4
Temperature Units
- Change the units from Celsius to
Fahrenheit.
5
LED Mode -
Change the mode from Normal (LEDs on) to
Stealth
(LEDs off).
6
Antenna Protocol -
Changes the protocol of
communication between the ACU and ODU. The options
are: ASCII messages of exchange or Binary.
7
Antenna Communication with the ACU -
Changes the
physical protocol of communication between ACU and
ODU. The protocol options for the internal ACU-ODU
modem are: 10.7MHz, RS485 and 333MHz. Each ODU
model operates at specific communication protocol
defined in the system specifications.
8
Modem Baudrate -
Defines the
physical protocol
communication speed of the internal ACU-ODU modem
(see
Antenna Communication with the ACU
). The
default rate is 115200 bauds.
