Chapter 3: Adjusting SmartPilot Settings
43
Dealer Calibration screens and settings
The items in Dealer Calibration vary according to the vessel type you have
selected. See the table on
page 52
for default values.
SeaTrial Calibration lock
This screen controls whether it is possible to access Seatrial Calibration.
Vessel type
Vessel type should be set when commissioning the SmartPilot (see
page 21
).
Notes: (1)
When you select the vessel type, the SmartPilot will set appropriate de
faults for several other calibration settings. Refer to the table on page 52
for default values.
(2)
The vessel type options will normally give optimum performance for typical
vessels of each type. However, you may find you can improve the
performance of your vessel by selecting an option for a different vessel
type.
Options
CAL LOCK OFF
Calibration lock off – Seatrial calibration can be accessed
(default)
CAL LOCK ON
Calibration lock on – Seatrial calibration cannot be
accessed
Options
Notes
DISPLACE
NOT APPLICABLE FOR S1 WHEEL / TILLER
PILOTS
SEMI DISPLACE
PLANING
STERN DRV
WORK BOAT
SAIL BOAT
(Typical setting for both S1 Wheel and
Tiller pilots).
Sailing boat
81282_1.book Page 43 Monday, October 2, 2006 1:58 PM
