Raymarine autopilot, Owner'S Handbook Manual

Page: 99 / 139

86 Autopilot Control Unit - Owner’s Handbook
7
Ad
ju
stin
g Au
to
pilo
t S
ettin
gs
• Maxiview instruments: use the
resp
key to toggle between
group letter and sequence number, and the
track
key to set the
identifying character.
When you have identified the instrument, it should display its
group letter and sequence number, e.g.
A2
.
Note: You can select all instruments in Group Setup mode.
6. Press either the up arrow or down arrow key to select another
instrument and repeat the procedure in step 5.
7. Repeat steps 5 and 6 until all you have identified all instruments in
the group.
Note: If you have more than eight ST60 or ST80 instruments, you
must create a second group with a separate identification code (for
example
B1
,
B2
etc.), operated by another remote keypad.
8. Use the arrow keys to select an instrument in the group to which
you want to allocate the as a keypad.
9. Press the up and down arrow keys together for 1 second. The
screen text will alternate between:
•
INST REM
and
KPD SETUP
for standard instruments
•
MAXI REM
and
KPD SETUP
for Maxiview instruments
Each instruments in the selected group will display
PRESS KEY
.
10. To allocate the to the selected group of instruments:
• press the
track
or
set crs
key for standard instruments
• press the
resp
or
track
key for Maxiview instruments
11. If you are creating more than one group, repeat steps 3 to 10 for
each group.
12. When you have set up all instrument groups, return to normal
operation as follows:
•
standard instruments:
•
press the
track
and
set crs
keys for 1 second to return to
Group Setup mode
• then press the
track
and
set crs
keys again for 2 seconds
to return to normal operation
• Maxiview instruments:
•
press the
resp
and
track
keys for 1 second, to return to
Group Setup mode
• press the
resp
and
track
keys again for 2 seconds to
return to normal operation.