Raymarine autopilot, Owner'S Handbook Manual

Page: 47 / 139

34 Autopilot Control Unit - Owner’s Handbook
3
Adv
an
ced
Ope
ration
3.5 Remotely controlling ST60 and ST80 instruments
You can use the to remotely control ST60 or ST80
instruments (both standard 110 mm and Maxiview instruments).
Note: Before attempting to remotely control ST60 or ST80
instruments, you first need to define the instrument grouping and
allocate the to the required group (see page 83).
To operate ST60 or ST80 instruments from the control unit:
1. Select either:
• the
INST REM
data page (to control standard instruments), or
• the
MAXI REM
data page (to control ST80 Maxiviews).
2. Carry out the required instrument control functions from your
(using the keys shown in the following illustration).
Note: The currently-selected instrument is indicated as follows:
•
on ST80 instruments, the characters are displayed as white
characters on a black background (instead of black on white)
• on ST60 digital instruments, you will see a
REMOTE
message
• on ST60 analogue instruments, you will see a flashing
TRUE/MAG
and/or
TRUE/APP
message
D4325-2
Replicates the key-layout of the selected instrument.
For example: if you press resp , the selected instrument
responds as though its far left key has been pressed.
Controlling a standard instrument Controlling a Maxiview instrument
Chapter
select
Page
select
Select instrument
All instrument types