Raymarine autopilot, Owner'S Handbook Manual

Page: 98 / 139

Chapter 7: Adjusting Autopilot Settings 85
7
Adjusti
ng Au
to
pil
ot
Setti
ng
s
Setting up an instrument group
1. At the :
• select the
INST REM
data page to group standard instruments
• select the
MAXI REM
data page to group Maxiview instruments
2. At the , use the arrow keys to select an instrument.
Note: The currently-selected instrument is indicated as follows:
•
on ST80 instruments (including Maxiview), the characters are
displayed as white characters on a black background (instead of
the standard black on white)
• on ST60 digital instruments, you will see a
REMOTE
message
• on ST60 analogue instruments, you will see the
TRUE/MAG
and/or
TRUE/APP
message flashing
3. Press both the up and down arrow keys on the for
4 seconds, to put the instruments and the into
Group Setup mode.
When you enter Group Setup mode:
• one instrument will be selected with a flashing cursor (and
inverse characters on ST80 instruments, including Maxiview)
• the screen text will alternate between:
•
INST REM
and
DSP SETUP
for standard instruments
•
MAXI REM
and
DSP SETUP
for Maxiview instruments
4. At the , use the up or down arrow key to select an
instrument to be the first in the group, i.e. so the required
instrument shows it has been selected (as described above).
5. Use the to allocate a group letter and sequence number
to the selected instrument. To do this:
•
Standard instruments: use the
track
key to toggle between
group letter and sequence number, and the
set crs
key to set
the identifying character.
D5520-1
Standard instruments: group setup mode
Selected instrument